Login or Register to make a submission.

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  • Authors have read and agree to their obligations under the journal's Statement of good practice.
  • The text conforms to the stylistic and bibliographic requirements outlined in the Author guidelines. The submission file must be in the OpenOffice.org, or Microsoft Word document file format.
  • A final list of references is included. Links to the sources are provided where possible, preferably to the DOI.
  • The submitted text has not been previously published or submitted to another journal.
  • If you used artificial intelligence tools, include the subheading "Use of Artificial Intelligence" declaring the scope and characteristics of that use, as indicated in the journal's policies. Remember that this is a sworn statement and your text will be submitted to plagiarism detection software.

 

 

Information for Authors

  1. Manuscript presentation
  2. Presentation
  3. Text
  4. Citation and Reference Guidelines
  5. Other text subheadings
  6. Submission

 

 

Information for Authors

Geograficando (ISSN 2346-898X) is an electronic, semiannual publication (released in June and December of each year) focused on academic and scientific issues within the field of geography—encompassing its physical, social, economic, political, and cultural dimensions. It publishes original, previously unpublished research articles, case studies, and essays, as well as book reviews and reviews of doctoral theses.

Submissions for the various sections are accepted on an ongoing basis.

Acceptance of a manuscript by the journal implies that it will not be submitted simultaneously to other journals or publishing bodies and the non-exclusive transfer of the authors' economic rights to the publishing entity, which permits reuse, after publication (postprint), under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The material may be shared (copied and redistributed in any medium or format) and adapted (remixed, transformed, and built upon the material of another work), provided that: a) the authorship and original source of publication (journal, publisher, and URL of the work) are cited; b) it is not used for commercial purposes; and c) the same license terms are maintained.

Policies regarding rights, dissemination, and indexing are detailed under "About" --> "About the Journal." The Editorial Committee of the journal *Geograficando* accepts for review original, previously unpublished scientific work in the field of geography or related areas of study. Works are considered unpublished if they have not appeared in any other print or electronic medium and are not currently under editorial review elsewhere. This requirement also applies to works previously published in the proceedings of scientific conferences.

Published works do not necessarily reflect the views of the journal’s editors; the author bears sole responsibility for the entire content of the article.

 

There are no fees for submission, publication, or access. Once published, the article will be available for free reading or download.

 

1. Manuscript presentation

The journal's Editorial Committee will accept for evaluation original and unpublished scientific works on topics or in areas of knowledge related to the journal. Works will be considered unpublished if they have not been published in other print or electronic media and are not currently under review by another publication. The unpublished status will also apply to works published in the proceedings of scientific conferences.

All manuscripts must be prepared using Microsoft Word (.doc file extension). The page size should be A4 (29.7 x 21 cm), portrait orientation, with 2.5 cm margins on the left, right, top, and bottom. Use Arial font, size 11, and 1.5 line spacing. Ediciones de la FaHCE standardizes and formats the files in the three publication formats using the Marcalyc XML bookmarking tool.

The maximum number of pages allowed for a manuscript varies depending on the type of contribution, as follows. Manuscripts that do not comply with these limits will not be accepted.

Research articles, case studies, or essays: must not exceed 15 pages, including abstracts, notes, bibliographic references, tables, and figures.

Book and thesis reviews: must be between 2 and 4 pages in length.

The page counts specified in both cases do not include the information provided on the title page or the anonymized title page.

Submissions must be made via this platform, and it is mandatory to attach two documents: one version titled "[First Author's Surname]ORIGINAL" and an anonymized version titled "[First Author's Surname]ANONYMIZED." This anonymization process entails removing "author information" from the word-processing software and deleting all personal identifiers—pertaining to both the authors and their affiliated institutions—from titles, data, footnotes, and the bibliography. If the manuscript mentions other works written by the authors, these should be replaced with "[AUTHOR, 2021]," and the corresponding entry must be removed from the list of references.

Authors are responsible for ensuring that their submissions adhere to the required formal presentation guidelines; manuscripts that do not comply will be returned. Submissions must be made exclusively by registering as an author and uploading the manuscript along with its associated metadata, following the steps provided by the system and ensuring that all author and submission details are fully entered.

 

2. Presentation

2.a Title

Title in the language of the text, followed by the title in English. It should be representative of the content and a maximum of 10 words. Subtitles are discouraged; they may be included in the text but not in the title for the table of contents. [In reviews, include the full Author's Review and Title with all the publishing information of the book being reviewed.] Titles cannot include footnotes or a period.

 

2.b.  Authors' names and surnames
 
2.c.  Authors' information

Below each author's name, the following information must be written in full (not acronyms): a) the name of the institution where the author conducted the research that produced the article; b) the country of the institution; c) the author's institutional email address; d) the author's ORCID. In the case of multiple authors, repeat these lines as many times as necessary and indicate the Declaration of Collaborative Roles (section 4.e explains how to register multiple authors, sponsorships, funding, and a biographical note). All this information must also be uploaded to the platform at the time of submission. For additional information, see "Author Information" below.

 

2.d. Title, Abstract, and Keywords in Spanish and English

An abstract of up to 200 words should be written in the language of the text. At the end of the abstract, provide up to 5 keywords, each beginning with a capital letter and separated by commas. Include keywords that you would use in a search. For articles submitted in Portuguese, the title, abstract, and keywords must also be submitted in both Spanish and English.

 

3. Text

Body

The body of the text can have the structure desired by the author. It must comply with the indicated format and respect the following guidelines. Use a clear subheading format, distinguishing between numbering, bold, and italics to differentiate sections from subsections (for example, 2.a, 2.b). Respect the citation format for in-text citations and direct quotations of the APA 7th Edition guidelines (established in the following section).

Sections

As a suggestion, it is recommended that research articles and research progress reports be divided into sections that include: a) Introduction, b) Methodology, c) Results and Discussion, and d) Conclusions. Other contributions may divide the text into sections as the authors deem appropriate.

Notes

Notes should always be placed at the end of the text (not as footnotes). Use the word processor's reference system and select "insert endnote" (Ctrl + Alt + o) after the punctuation mark. Footnotes should not be used solely for bibliographic citations. Notes cannot be included with titles or subtitles, as these are metadata of the scientific article and must always be cited within the text.

Abbreviations

Their meaning should be explained the first time they are used in the text, for example: United Nations (UN). After this explanation, only the abbreviation should be used. It is recommended to avoid overuse of abbreviations.

Figures, Tables, Graphs, or Images

For figures, tables, graphs, or images, identify them with numbers and always reference or mention them in the text. Title them at the top and indicate the source at the bottom. Consider the publication format when creating a table: keep the reader in mind, and to ensure the visibility of the data, do not design tables with more columns than can be seen on a vertical A4 sheet. For the publication of extensive, systematized datasets that serve as the basis for the article, the UNLP Research Data Repository must be used. Tables with a special design may be included as images rather than as tables. Landscape tables (exceeding the width of the page, vertical orientation) are not acceptable, nor are tables that exceed one page (see page format and margins in 1. Manuscript Presentation).

Image Size

It is essential that figures be submitted as JPG image files for web with no more than 96 dpi, a maximum width of 600px, and a maximum height of 800px. Image editors allow you to resize images. Landscape images (those exceeding the width of the page, in portrait orientation) are not accepted.

 

 

4. Citation and Reference Guidelines

Review your text before submitting it for evaluation and confirm that all citations are correctly referenced in the bibliography. Also, confirm that the list does not include any references not mentioned in the text. Do not include references that are not fundamental to your argument.

4.a. In-text quotations
  • Quotations of up to 40 words should be enclosed in quotation marks. Quotations longer than 40 words should be set off in a separate paragraph, indented from the left margin, without quotation marks, and separated from the preceding and following text by a space.
  • Include the author, year of publication, and page number. Example: (López, 1996, p. 125). If the author's last name is mentioned in the text, only the year, page, and number may be included: Example: López states in his book (1996, p. 125).
  • If a work has two authors, both names are cited each time the reference appears. If there are more, use (Surname et al., year) and provide the full reference in the reference list.
  • Never use footnotes or endnotes solely to indicate a bibliographic reference.
  • It is recommended to avoid excessive use of direct quotations or critical references.

 

4.b In-text citations
  • Do not overuse reference citations. Include only those sources that are fundamental to supporting the article's argument. This will be considered in the evaluation.
  • The author's last name, or the acronym of the institutional author, should be indicated in parentheses, followed by a comma and the year of publication. For example (Mannino, 2005; AAHE, 2006).
  • When citing two or more works, separate them with semicolons (Kaplan, 2008; Neuberger and Counsell, 2002; Buela Casal et al., 2006). • When the author and year coincide, a letter will be used to distinguish them (Zeng and Zummer, 2009a; 2009b).

 

4.c Documentary or Oral Sources Without Complete Reference Data

If unedited primary sources are used, which cannot be referenced in a standard way, or where referencing is not necessary for the article's scientific metric, a section entitled “Documentary Sources Used” will be added before the bibliographic references. All available data for identifying the source will be included there. Example: Author, A. A. (Day, Month, Year). Title of the material. [Description of the material]. Name of the compilation (classification number, box number, file number or name, etc.). Name and location of the repository.

 

4.d List of References

All cited references will comprise the References list, a section located at the end of the work under that title. Only those used in the development of the article should be included, in accordance with the APA 7th edition guidelines (available at https://apastyle.apa.org/; examples at https://normas-apa.org). Under this subheading, all bibliographic sources cited in the article, and only those, must be listed. Please check the consistency of surnames and dates before submitting your manuscript.

The list must follow alphabetical order. If several works by the same author are referenced, the surnames must be repeated (avoid using hyphens), and the entries should be ordered by year of publication, from oldest to most recent.

In cases where a surname and year are repeated, differentiate one entry from another by adding lowercase letters (a, b, c, etc.) immediately after the year and within the same parentheses. This indication will correspond to the citation included in the article text.

 

5. Other text subheadings

All must precede the References.

Authorship declaration or collaborative roles

This must be included when the work has more than one author. Each member's contribution, that is, their participation in the article's authorship, must be indicated. If "Writing, revision, and editing" is shared, the role should be written once, followed by the authors. For other roles, please refer to the description provided by CAICYT. Example: Writing, revision, and editing: César Milstein and Beatriz Sarlo.

Clarifications regarding the workplace, institutional affiliation, or institutional affiliation of each author

 Provide the full name of the institution where they work (workplace) along with the country. Use a comma (",") between each piece of information. Example:

Faculty of Humanities, National University of Córdoba, Argentina

If the institution has dual or triple affiliation, use a hyphen (“-”) between each one. Example: Institute xxx, (UNCo - CONICET), University of Comahue, Argentina.

In cases where an author must indicate more than one place of work, a slash (“/”) will be used to separate them. Following the design and publication system of the FaHCE Journals, this information will be indicated on a single line.

 

Declaration on the Use of Generative Artificial Intelligence

If artificial intelligence tools were used, include a subheading titled "Use of Artificial Intelligence" stating the scope and nature of that use—whether for writing, proofreading, academic editing, or any other application—in accordance with the journal's policies. Additionally, it is mandatory to properly cite the sources used (algorithm provider, year, model, etc.).

 

Acknowledgments

These are not mandatory. If necessary, they should be included at the end of the text, before the bibliography, and should be brief. Authors are responsible for obtaining the necessary permissions to mention the names of individuals or organizations they deem worthy of acknowledgment.

 

Funding or Sponsorship

This is not mandatory, but if it is necessary to indicate it, use the subheading before the bibliography. Acknowledge the support received for funding the activities, along with the project identification number, the funding agencies/organizations, the source(s) of funds, and any other relevant information. Remember to anonymize this information in the corresponding version.

 

Biographical Note

If you wish to include a brief profile of the author's education or professional experience, you can do so with this subheading before the bibliography. Each author can update their own profile with their academic information on the journal's OJS platform. There, you can register additional information, such as affiliation with specific centers or projects, academic degrees, or positions held. This information will be visible in the "Author Biography" section on the article's cover page. You are encouraged to complete and update your registration. Authors with ORCID profiles can also keep their personal and research information up to date on that site.

Authors are responsible for the formal aspects of manuscript submission: articles that do not conform to these guidelines will be returned. Submissions must be made exclusively by registering as an author on this platform and uploading the manuscript and its metadata as indicated in the system's instructions, ensuring that all author and submission information is complete. If you experience technical difficulties submitting your manuscript, please contact: publicaciones@fahce.unlp.edu.ar.

 

6. Submission

The text, tables, and figures must be included in a single document. Figures, tables, or images may also be uploaded separately to the platform. Files should be named using the following format: first author's surname_year_content. For example: Pérez_2010_text, Pérez_2010_tables, Pérez_2010_figure 1, Pérez_2010_figure 2.

Authors are responsible for ensuring that their submissions adhere to the required formal presentation guidelines; manuscripts that do not comply with these standards will be returned.

Submissions must be made exclusively by registering as an author on this platform and uploading the submission along with its associated metadata, following the steps provided by the system and ensuring that all author and submission details are fully entered. If you encounter any technical issues during the submission process, please contact: publicaciones@fahce.unlp.edu.ar.

 

 

7. 7. Editorial Process and Evaluation System

Submissions are accepted on a rolling basis. All submitted manuscripts are received by the editorial office, which acknowledges receipt to the authors. Submissions undergo a preliminary review by the editors to determine whether the subject matter aligns with the journal’s stated scope. If a submission does not meet this requirement, it is rejected. If the initial assessment is positive, two subject-matter experts are selected to evaluate the quality of the work. The journal employs a double-blind peer review process (ensuring the anonymity of both authors and reviewers).

*Geograficando* utilizes anti-plagiarism tools.

Reviewers evaluate submissions based on the following criteria:

  1. Fulfillment of the stated purpose
  2. Soundness of the theoretical-conceptual approach
  3. Methodological rigor
  4. Style, terminology, and clarity of exposition
  5. Bibliography

 

The double-blind peer review process will result in one of the following outcomes—which are final and not subject to appeal—that will be communicated to the author(s):

  1. Accepted for publication in its current form or with minor formal revisions.
  2. Accepted subject to major revisions. Publication is contingent upon the implementation of changes or adjustments requested by the reviewers; authors have 30 days from the date of receipt to complete these revisions.
  3. Rejected (the manuscript is returned to the author, accompanied by a detailed, well-founded assessment from the reviewers).

In cases where reviewers’ evaluations and recommendations differ, the editors will request the intervention of a third reviewer.

Once a submission is accepted, the author(s) will be notified of the outcome. The editors will initiate the copy-editing stage for the manuscripts in consultation with the author(s). The author(s) will have a maximum of 7 days from the time of receipt to respond; if no response is received within this period, it will be assumed that they consent to the content and form as presented.

Once a submission has been accepted, the author(s) will be informed of the volume and issue in which it will be published. The journal does not charge any publication fees.

 

Actualizado octubre 2026